KIT ONLY: ANGRi Spec JK/JKU 3" COIL Suspension System with Teraflex 9550 SHOCKS, ARMS, TRACK ROD, STABILISER, CV for 2dr JK and 4dr JKU
This is the spec and parts needed to do a 3" lift properly and keep your vehicle free of issues and within safe and reliable tolerances. The ANGRi spec serious Offroad and Street 3" suspension lift system with the 9550 VSS series shocks from Teraflex, gives you maximum flexibility and extreme performance.
3" Teraflex Suspension system with Teraflex Coils, Teraflex 9550 VSS shocks, Lower Front Alpine adjustable Control Arms, Forged Front Adjustable Monster Track Bar, Exhaust Spacer, VSS Steering Stabiliser, Brake Line Extenders and Anchors, Disconnects and the RZeppa High Angle CV joint (Essential to protect your drivetrain for 3"+ Lifts) are supplied ready to install into your Wrangler.
Available in 2Dr and 4Dr versions. (For upgraded tyre size up to 35"diameter and potentially 37" with modified fenders.)
ANGRi 3" SYSTEM INCLUDES
Teraflex 3" Lift Kit with 3” Lift system including...
3” lift coil springs
Front sway bar disconnects
Rear sway bar links
Front sway bar links
Braided front brake line extenders
Rear track bar bracket
Bump stops and all connecting hardware.
Teraflex Monster Front Adjustable forged track bar.
Teraflex RZeppa High Angle CV Joint
Teraflex Alpine adjustable Lower Front Control Arms
Teraflex 9550 VSS 3-4" Performance Shock Absorbers
Teraflex Exhaust Spacer
Teraflex 9550 Steering Stabiliser
EXCLUDES FULL FITTING at ANGRiJeep (Available as extra and highly recommended)
ENHANCE your 3" lift by moving up to Falcon 2.1 Shocks and Steering Stabiliser, adding a 1.25" Body Lift kit, or add the Teraflex Alpine Adjustable Rear Upper Control Arms for more accurate Offroad articulation and better rear wheel centring.
The TeraFlex JK 3” Suspension Lift Kit delivers everything that you need to tackle some serious trails. Drivability and performance are the most important factors that are engineered and built into every TeraFlex lift kit. Properly developed suspension geometry, roll center, and load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there and back!
This system includes 3” lift coil springs, front adjustable lower FlexArms, (rear upper adjustable FlexArms OPTION), 9550 VSS shock absorbers and stabiliser, front swaybar disconnects, rear swaybar links, rear trackbar bracket, Adjustable forged monster track bar, bumpstops and all necessary hardware. This kit will allow you to run up to a 35” tire (aftermarket wheels with 4.5” backspacing or less are required).