KIT ONLY: ANGRi Spec JK/JKU 3" COIL Suspension System with FALCON SP2 SHOCKS, ARMS, TRACK ROD, STABILISER, CV for 2dr JK and 4dr JKU
This is the spec and parts needed to do a 3" lift properly and keep your vehicle free of issues and within safe and reliable tolerances. The ANGRi spec serious Offroad and Street 3" suspension lift system with the highly regarded 2.1 SP2 series shocks from Falcon, gives you maximum flexibility and extreme performance.
3" Teraflex Suspension system with Teraflex Coils, Falcon 2.1 SP2 shocks, Lower Front Alpine adjustable Control Arms, Forged Front Adjustable Monster Track Bar, Exhaust Spacer, VSS Steering Stabiliser, Brake Line Extenders and Anchors, Disconnects and the RZeppa High Angle CV joint (Essential to protect your drivetrain for 3"+ Lifts) are supplied ready to install into your Wrangler.
Available in 2Dr and 4Dr versions. (For upgraded tyre size up to 35"diameter and potentially 37" with modified fenders.)
ANGRi 3" SYSTEM INCLUDES
Teraflex 3" Lift Kit with 3” Lift system including...
3” lift coil springs
Front sway bar disconnects
Rear sway bar links
Front sway bar links
Braided front brake line extenders
Rear track bar bracket
Bump stops and all connecting hardware.
Teraflex Monster Front Adjustable forged track bar.
Teraflex RZeppa High Angle CV Joint
Teraflex Alpine adjustable Lower Front Control Arms
Falcon 3"-3.5" 2.1 Performance Shock Absorbers SP2 MODE ADJUST
Teraflex Exhaust Spacer
Teraflex 9550 Steering Stabiliser
EXCLUDES FULL FITTING at ANGRiJeep (Available as extra and highly recommended)
This lift has been enhanced with the Falcon 2.1 SP2 Shocks
For further enhancement, add the Falcon 2.1 or 2.2 Steering Stabiliser, a 1.25" Body Lift kit, or add the Teraflex Alpine Adjustable Rear Upper Control Arms for more accurate Offroad articulation and better rear wheel centring (recommended for extensive offroad use and if fitting 37" tyres).
The TeraFlex JK 3” Suspension Lift Kit delivers everything that you need to tackle some serious trails. Drivability and performance are the most important factors that are engineered and built into every TeraFlex lift kit. Properly developed suspension geometry, roll center, and load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there and back!
This system includes 3” lift coil springs, front adjustable lower FlexArms, (rear upper adjustable FlexArms OPTION), Falcon 2.1 shock absorbers (OPTION OF SP2 UPGRADE) and Teraflex 9550 stabiliser, front swaybar disconnects, rear swaybar links, rear trackbar bracket, Adjustable forged monster track bar, bumpstops and all necessary hardware. This kit will allow you to run up to a 35” tyre on standard fenders (aftermarket wheels with 4.5” backspacing or less are required). 37s can be run with aftermarket high clearance fender flares (and the optional rear arms).