TOPFIRE IS EXCLUSIVELY AVAILABLE FROM ANGRi. IF YOU SEE IT ELSEWHERE, IT IS A FAKE COPY!

PROCAL - Wrangler JK/JKU Calibration Module
PROCAL - Wrangler JK/JKU Calibration Module
PROCAL - Wrangler JK/JKU Calibration Module
PROCAL - Wrangler JK/JKU Calibration Module
PROCAL - Wrangler JK/JKU Calibration Module
  • Load image into Gallery viewer, PROCAL - Wrangler JK/JKU Calibration Module
  • Load image into Gallery viewer, PROCAL - Wrangler JK/JKU Calibration Module
  • Load image into Gallery viewer, PROCAL - Wrangler JK/JKU Calibration Module
  • Load image into Gallery viewer, PROCAL - Wrangler JK/JKU Calibration Module
  • Load image into Gallery viewer, PROCAL - Wrangler JK/JKU Calibration Module

PROCAL - Wrangler JK/JKU Calibration Module

Vendor
Procal
Regular price
R 3,499.00
Sale price
R 3,499.00
Regular price
Sold out
Unit price
per 
VAT included. Shipping calculated at checkout.

PROCAL - Wrangler JK/JKU Calibration Module

The ProCal Module allows you to make a variety of useful changes to your Wrangler JK/JKU that are not offered by the dealer or any other re-programmer.

It gives you the ability to correct the speedometer and gear ratio when larger tires are installed. This is especially useful because when the speedometer is left uncorrected there is a major degradation in the performance of the stability control (ESP), transmission shifting, and overall engine performance. The Tire Pressure Monitoring System can also be re-calibrated to better suit aftermarket tires without triggering the dash light.

This module can also activate daytime running lamps, allow for "one-touch" turn signals, clear engine codes, enable a temporarily increased engine idle speed for winching, and can help alignment technicians align the vehicle perfectly for optimal ESP performance.

It is equipped with a series of easy-to-use DIP switches that can be set before plugging the module into your Jeep's OBDII. The included Quick Reference Guide has all of the codes for desired re-calibration. It takes only minutes to complete the entire process and is just as easy to restore the vehicle back to its original settings.

:: Corrects your speedometer and gear shifts when fitting larger tyre sizes
:: Easy to use DIP switches
:: Optimises ESP performance
:: Ability to clear engine codes
:: Can increase engine idle speed for winching
:: Recalibrates /Deletes tyre pressure monitor (TPMS)
:: Transfer case calibration available
:: Allows for "one touch" turn signals
:: Takes around 10 minutes to install

NB** WILL enable axle gear ratio changes to be made to JK models equipped with A580 automatic transmission (2011+ 2.8L, 2012+ 3.6L).
CANNOT change axle gear ratios for 2011+ JK models with a 2.8L CRD diesel and a manual transmission.
Transfer Case Calibration function allows you to install a non-stock transfer case onto 2012+ JK models with a A580 transmission without causing the vehicle to go into limp mode. This includes 2-speed Atlas transfer cases as well as Chrysler's Command-Trac NV241 and Rock-Trac NV241 transfer cases.

On first use, the Procal becomes Vin-locked to your vehicle so can only be used for one vehicle.